If you were to survey a group of people that own electric cars, you will find out that the cheapest way to own an electric vehicle (EV) is to retrofit existing gasoline driven car. For the time being, a new EV is still relatively expensive and most people would not be able to afford it. Those that are well versed with the workings of a car are converting to EV via Do It Yourself (DIY) approach at home. How do you retrofit a conventional car to electric on your own? This article will provide some information on the conversion process.
DIY electric car conversion process is actually quite a simple process. The idea is to remove the internal combustion engine and replace it with a Direct Current (DC) electric motor. Since the engine is gone, all its associated components such as gas tank, fuel lines, radiator and exhaust pipe are to be removed as well. Most of the free spaces in the EV will be used to store deep cycle batteries. A normal electric car would require 15 to 20 units of batteries. On a full charge, the EV would be able to travel approximately 150 miles. The full extend of the mileage will depends on the weight of the car, the battery condition, electric motor and also the driving condition.
To a lay person, converting a car to EV electric via DIY would seem like a major challenge. In this case, it is recommended to send the car to a professional workshop to be retrofitted. Even by outsourcing the conversion process, the investment cost is still cheaper compared to buying a new electric car.
Are you planning to send your gasoline driven car to a professional workshop to be electric retrofitted? Get some electric vehicle knowledge before you do so. There are many Electric Car Conversion Books on the web.
If you were to survey a group of people that own electric cars, you will find out that the cheapest way to own an electric vehicle (EV) is to retrofit existing gasoline driven car. For the time being, a new EV is still relatively expensive and most people would not be able to afford it. Those that are well versed with the workings of a car are converting to EV via Do It Yourself (DIY) approach at home. How do you retrofit a conventional car to electric on your own? This article will provide some information on the conversion process.
DIY electric car conversion process is actually quite a simple process. The idea is to remove the internal combustion engine and replace it with a Direct Current (DC) electric motor. Since the engine is gone, all its associated components such as gas tank, fuel lines, radiator and exhaust pipe are to be removed as well. Most of the free spaces in the EV will be used to store deep cycle batteries. A normal electric car would require 15 to 20 units of batteries. On a full charge, the EV would be able to travel approximately 150 miles. The full extend of the mileage will depends on the weight of the car, the battery condition, electric motor and also the driving condition.
To a lay person, converting a car to electric via DIY would seem like a major challenge. In this case, it is recommended to send the car to a professional workshop to be retrofitted. Even by outsourcing the conversion process, the investment cost is still cheaper compared to buying a new electric car.
Are you planning to send your gasoline driven car to a professional workshop to be electric retrofitted? Get some electric vehicle knowledge before you do so. There are many on the web.